Model #20 Guide for Large Bandsaws

Model #20 for Large Bandsaws

Parts List:

  1. Thumb Screw
  2. Large Slide
  3. Small Slide
  4. Slide Connecting Screw
  5. Assembly (two thumb screws and one each of large slide, small slide and slide connecting screw) Not Pictured
  6. Lower Guide Bracket
  7. No. 617-R Ball Bearing Wheel, double sealed
  8. 5/16" Set Screw
  9. 3/4" Top Guide Shaft
  10. Washer
  11. 5/16" x 1" Cap Screw
  12. 3/4" Lower Guide Shaft
  13. Upper Guide Body Casting
  14. Lower Guide Body Casting

Model #20 guides can be installed on any machine having at least 2-1/2" from back of blade to top guide post, and from back of blade to frame below table and will support blades from 1/4" to 2" wide. For 2" blade simply remove and reverse the center assembly. Do no remove the wheel from slides. Ball bearing guide wheels are 2-1/4" O.D.

Watch the Model #20 Band Saw Guide in Action

To Place and Order or Get more Information:

Call us at 1-866-340-3234, fax us at 1-866-447-0090 or use the contact form to the right.

To determine the model that you need for your application, please be ready with the following information:

  • Name and model of saw, if available
  • Distance back of blade to guide post
  • Distance back of blade to frame below table
  • Size of insert hole in upper guide post

Order/Contact Form: